Franklin Hodge

Cooling Tower Manufacturers
Share via:
Share via:

Forced Draught Cooling Towers

Forced draught cooling towers push air through the tower using fans mounted at the base, which makes them well suited to plant rooms, ducted installs and sites with height or access limits. Franklin Hodge builds forced draught cooling towers in two Carter Environmental series, the centrifugal-fan BAL and the axial-fan SAN, from 6 to 600 cubic metres per hour.

 

How a Forced Draught Cooling Tower Works 

 

In a forced draught design, the fans sit at the base of the tower and blow air up through the fill, against the falling water. Mounting the fans low keeps the heavy rotating parts at ground level, which makes access for maintenance easier and allows the tower to be ducted or fitted indoors. It is a practical layout when a fan on top is not an option.

 

The Carter BAL and SAN Forced Draught Range 

 

We build forced draught cooling towers in two series: 

  • BAL: forced-draught counterflow with belt-driven centrifugal fans at the base 
  • SAN: forced-draught counterflow with direct-drive axial fans at the base 

Both run from 6 to 600 cubic metres per hour and come as single or multi-cell units, in open or closed-circuit variants. We size each one to your heat load rather than offering a fixed catalogue. Counterflow fill and even water distribution give efficient heat transfer in a compact footprint, and multi-cell builds let you keep cooling running while one cell is serviced. Both sit within our evaporative cooling towers range, and the choice of centrifugal or axial cooling tower fans comes down to your airflow, noise and efficiency needs.

 

Where Forced Draught Cooling Towers Suit Your Site 

 

Because the fans sit low, forced draught towers fit where headroom is tight, or the unit needs ducting, such as enclosed plant rooms and indoor installations. The design also suits sites with restricted crane access, and we engineer each unit to fit the space you have rather than forcing your site around a standard box.

 

Forced Draught Cooling Tower Build Options 

 

Every forced draught cooling tower is built to last in its environment. Stainless steel construction resists corrosion, and the whole unit is fully recyclable rather than GRP. Where a site is exposed or chemically aggressive, we add protective cooling tower coatings for extra durability, and where noise is a concern, we fit sound attenuation on the inlet, outlet and breakout areas.

 

Servicing and Spare Parts for Forced Draught Cooling Towers 

 

As the original manufacturer, we service, inspect and refurbish the towers we build, and we stock cooling tower spare parts dispatched worldwide from our UK factory. One team designs, builds and maintains your tower, so support does not get lost between suppliers.

 

Request a Forced Draught Cooling Tower Quote 

 

Tell us your flow rate, approach temperature and site constraints, and we will recommend whether a BAL or SAN forced draught tower fits best. Request a quote and we will get back to you with a specification and price.

Scroll to Top